Ibm 37L1388 Manual do Utilizador

40X- X InternalIDE CD-ROM Drive17User's GuideOPTIONSby IBM

4 IDE connectorConnects the CD-ROM drive to the IDE cable5 DC power connectorConnects the dc power cord to the CD-ROM drive Installing the DriveFoll

Some non-IBM computers support the cable-select setting, where the position ofthe device on the cable determines whether a device is master or slave.

2. Align the drive-bay screw holes with the threaded holes in the drive housing ormounting bracket; then thread the screws in loosely to check their p

Step 8. Attaching the faceplatesThis option package includes two faceplates that conform to the curved design ofcertain systems. If your computer syst

Installing the device driver for DOS and OS/21. Turn on your computer and start your operating system, if you have not alreadydone so.2. Go to a comma

Installation guide (Translated) Product descriptionThe IBM 40X-17X Internal IDE CD-ROM Drive can read a compact disc (CD)containing approximately 680

Before you beginRead the following information before you start your installation.The installer of the drive will have to complete the following steps

Front view of the driveRefer to the illustration to identify parts which might be referred to in the installationinstructions.1 Headphone jackThis ja

4 IDE connectorConnects the CD-ROM drive to the IDE cable5 DC power connectorConnects the dc power cord to the CD-ROM drive Installing the DriveFoll

Some non-IBM computers support the cable-select setting, where the position ofthe device on the cable determines whether a device is master or slave.

First Edition (April 1999)The following paragraph does not apply to the United Kingdom or any country where suchprovisions are inconsistent with local

2. Align the drive-bay screw holes with the threaded holes in the drive housing ormounting bracket; then thread the screws in loosely to check their p

Step 8. Attaching the faceplatesThis option package includes two faceplates that conform to the curved design ofcertain systems. If your computer syst

Installing the device driver for DOS and OS/21. Turn on your computer and start your operating system, if you have not alreadydone so.2. Go to a comma

Product RegistrationThank you for purchasing OPTIONS by IBM. Please take a few moments to registeryour product and provide us with information that w

1-18 40X-17X Internal IDE CD-ROM Drive

Part 2: User's guideUsing the driveThis section includes instructions for the proper care of CDs and the care andoperation of your CD-ROM drive.

Caring for the CD-ROM driveTo protect your CD-ROM drive during operation, observe the following precautions.Remove any CD in the drive before moving t

1. Press the Eject/Load button.2. Look at the above illustrations and compare to your loading tray. 3.If your loading tray looks like the left illustr

Manually ejecting a CDIf you press the Eject/Load button and the tray does not slide out, turn off thecomputer and straighten a large paper clip to fo

DOSThe DOS operating system does not have a built-in program for playing audio CDs.In order for you to listen to audio CDs using DOS, you must use th

ContentsRegistering your option ... ivAbout this book ... vPart 1: Installation guide . . . .

If you do not see the Media Player or CD Audio icons within the Media Playerfolder, you must install the Windows CD Audio device driver as follows:1.

OS/2 WarpTo read a data CD:1. Turn on your computer and start your operating system, if you have not alreadydone so.2. Insert a data CD into the CD-R

8 40X-17X Internal IDE CD-ROM Drive

Part 3: AppendixesAppendix A. Customizing device driverconfiguration settingsThis section contains optional device driver configuration information f

The /P parameter is not needed if your CD-ROM drive is on either of theseports. However, if your computer (or IDE adapter) uses different IDE portaddr

/I:nEnables interrupt sharing. If n=1, interrupt sharing is enabled. If n=0, interruptsharing is disabled. The default value is 0. Enable this paramet

CDSETUP will set this value to 10. The default value for MSCDEX with no/M parameter is 4.The greater this value, the better the CD-ROM drive will perf

Conserving DOS conventional memoryIf the CD-ROM support software is loaded in DOS conventional memory (below 640KB RAM), there might be insufficient m

Updating the device driver for a DOS network serverIf you are using the CD-ROM drive in a DOS network server you need to make thefollowing changes:1.

/M:n Indicates the maximum number of file sectors to be read at a time. Thedefault is eight sectors./K Uses Kanji supplementary volume descriptor./Q S

Registering your optionThank you for purchasing OPTIONS by IBM. Please take a few moments to registeryour product and provide us with information that

Appendix B. Problem solvingComputer problems can be caused by hardware, software, or user error. Using theinformation in this section, you might be a

port, attach one end of the cable to the IDE port, and the other end connector tothe device; leave the middle connector open.You cannot access the CD-

You cannot access the CD-ROM drive or the CD-ROM icon does not display(Windows 95, Windows 98, Windows NT 4.0).When the CD-ROM drive is properly insta

You cannot access the CD-ROM or the CD-ROM icon does not display (OS/2).Your CD-ROM device driver might not be loaded or cannot be found. Beforechecki

your computer for additional details on selecting IDE performance modes. Many oldercomputers will not have a selection of IDE performance modes.The co

If you are unable to access the CD, you might have a hardware problem. Ifyou are unable to read the CD or a drive letter is not assigned by MSCDEX,go

You receive a common error message.These are actions for some common error messages. CDR-103The CD in the CD-ROM drive is not a High Sierra or ISO 96

Appendix C. Help and serviceThis section contains information on how to obtain online and telephone technicalsupport.Online technical supportOnline te

For the support telephone number and support hours by country, refer to the followingtable or to the enclosed technical support insert. If the number

IBM warrants that each Machine 1) is free from defects in materials and workmanship and 2)conforms to IBM's Official Published Specifications. Th

About this bookThis manual contains information on the 40X-17X Internal IDE CD-ROM Drive. It isdivided into the following parts:Part 1: Installation i

When warranty service involves the exchange of a Machine or part, the item IBM or your resellerreplaces becomes its property and the replacement becom

UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THEFOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES(OTHER THAN THOSE UNDER THE FIRST ITEM LI

failure caused by a product for which IBM is not responsible. The warranty is voided byremoval or alteration of Machine or parts identification labels

2. obtain authorization from the owner to have IBM or your reseller service a Machine that youdo not own; and3. where applicable, before service is pr

Part 2 - Worldwide Country-Unique Terms ASIA PACIFICAUSTRALIA: The IBM Warranty for Machines: The following paragraph is added to thisSection:The wa

If you purchased an IBM Machine in Austria, Belgium, Denmark, Estonia, Finland, France,Germany, Greece, Iceland, Ireland, Italy, Latvia, Lithuania, Lu

In item 2, replace “U.S. $100,000” with “1.000.000 DEM.”The following sentence is added to the end of the first paragraph of item 2:IBM's liabili

The following item is added to this paragraph:3. breach of IBM's obligations implied by Section 12 of the Sale of Goods Act 1979 or Section2 of t

Electronic emission notices40X-17X Internal IDE CD-ROM DriveFederal Communications Commission (FCC) StatementNote: This equipment has been tested and

European Union - Emission DirectiveThis product is in conformity with the protection requirements of EU CouncilDirective 89/366/ECC on the approximati

vi 40X-17X Internal IDE CD-ROM Drive

3-28 40X-17X Internal IDE CD-ROM Drive

IBMPart Number: 37L1388Printed in U.S.A.37L1388

Part 1: Installation guide Product descriptionThe IBM 40X-17X Internal IDE CD-ROM Drive can read a compact disc (CD)containing approximately 680 MB1

Before you beginRead the following information before you start your installation.The installer of the drive will have to complete the following steps

Front view of the driveRefer to the illustration to identify parts which might be referred to in the installationinstructions.1 Headphone jackThis ja