Ibm uPD78082 Manual do Utilizador descarregar pdf (Página 182)

159

CHAPTER 11 SERIAL INTERFACE CHANNEL 2

D1 D2 D6 D7 ParityD0TxD (Output)

INTST

STOP

START

D1 D2 D6 D7 ParityD0TxD (Output)

INTST

STOP

START

A transmit operation is started by writing transmit data to the transmit shift register (TXS). The start bit,

parity bit and stop bit(s) are added automatically.

When the transmit operation starts, the data in the transmit shift register (TXS) is shifted out, and when

the transmit shift register (TXS) is empty, a transmission completion interrupt request (INTST) is

generated.

Figure 11-8. Asynchronous Serial Interface Transmission Completion Interrupt Request Timing

(a) Stop bit length: 1

(b) Stop bit length: 2

Caution Rewriting of the asynchronous serial interface mode register (ASIM) should not be

performed during a transmit operation. If rewriting of the ASIM register is performed

during transmission, subsequent transmit operations may not be possible (the normal

state is restored by RESET input).

It is possible to determine whether transmission is in progress by software by using a

transmission completion interrupt request (INTST) or the interrupt request flag (STIF)

set by the INTST.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 273 274

Sem comentários

Ibm uPD78082 Manual do Utilizador Página 182