Ibm THINKCENTRE 8123 Manual do Utilizador descarregar pdf (Página 22)

13. Release and pivot lever 1 upward. Remove the heat sink 2 from the

system board by carefully lifting it up and off the mounting bracket. Place the

heat sink on its side on a clean, flat surface so the thermal material on the

bottom of the heat sink does not touch the surface and become contaminated.

14. Release and pivot locking lever 2 securing the microprocessor 1, then

pivot the microprocessor retainer 3 until it is open.

14 Hardware Replacement Guide

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Sem comentários

Ibm THINKCENTRE 8123 Manual do Utilizador Página 22