Ibm B50 Manual do Utilizador Página 40
- Página / 198
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Step 1240-1
1. Ensure that the diagnostics and the operating system are shut down.
2. Power off the system.
3. Remove and reinstall any installed memory modules.
4. Power on the system.
Does the system stop with a memory checkpoint displayed on the operator
panel?
NO Reseating the memory modules has corrected the problem. Go to "MAP
0410: Repair Checkout" in Diagnostics Information for Multiple Bus
Systems.
YES If there is only one memory module installed, go to “Step 1240-3” on
page 2-11.
If there is more than one memory module installed, go to “Step 1240-2.”
Step 1240-2
1. Power off the system.
2. Remove all but one of the installed memory modules. Record the position of the
memory modules removed so that when instructed to reinstall them, they can be
installed in their original positions.
3. Power on the system.
Does the system stop with a memory checkpoint displayed on the operator
panel?
NO Repeat this step until all the memory modules are installed and tested.
If all the memory modules have been installed, reseating the memory
modules has corrected the problem.
Go to "MAP 0410: Repair Checkout" in Diagnostics Information for
Multiple Bus Systems.
YES Go to “Step 1240-3” on page 2-11.
2-10 7046 Model B50 Service Guide
- Service Guide 1
- Contents 5
- Communications Statements 9
- VCCI Statement 11
- Radio Protection for Germany 12
- Safety Notices 13
- Laser Safety Information 14
- Environmental Notices 15
- About This Book 17
- Trademarks 18
- Front View 19
- Rear View 20
- Front View without Covers 21
- Power Supply 23
- Operating Voltage 23
- Heat Output (Maximum) 23
- Acoustics 23
- System Board Locations 24
- System Board Jumper Settings 26
- SCSI Bus Termination 27
- Service Inspection Guide 28
- Entry MAP 31
- Purpose of This MAP 36
- Step 1020-1 36
- Step 1020-2 38
- Step 1020-3 38
- Purpose of this MAP 39
- General Memory Information 39
- Step 1240-1 40
- Step 1240-2 40
- Step 1240-3 41
- Step 1240-4 41
- MAP 1520: Power 42
- Step 1520-1 43
- Step 1520-2 43
- Step 1520-3 44
- Step 1520-4 45
- Step 1520-5 46
- Step 1540-1 48
- Step 1540-2 48
- Step 1540-3 49
- Step 1540-4 50
- Step 1540-5 51
- Step 1540-6 51
- Step 1540-7 52
- Step 1540-8 52
- Step 1540-9 53
- Step 1540-10 55
- Step 1540-11 56
- Step 1540-12 57
- Step 1540-13 58
- Step 1540-14 59
- Step 1540-15 60
- Step 1540-16 60
- Step 1540-17 61
- Step 1540-18 61
- Step 1540-19 62
- Step 1540-20 63
- Step 1540-21 64
- Step 1540-22 64
- Memory PD Bits 77
- Firmware Checkpoints 78
- Boot Problems or Concerns 91
- Chapter 4. Location Codes 95
- AIX Location Codes 97
- Non-SCSI Devices/Drives 97
- SCSI devices/drives 99
- Default Boot List 101
- Custom Boot List 101
- Recommended Boot Options 103
- MultiBoot 110
- Utilities 113
- Password 115
- Power-On Password 115
- Enter Password 116
- Verify Password 116
- Privileged-Access Password 117
- Hard Disk Spin Up Delay 119
- Error Log 120
- Set Address 121
- Ping Config 121
- Firmware Update 125
- Firmware Recovery 126
- Display Configuration 128
- MultiBoot Menu 129
- Select Boot Devices 130
- Display Error Log 136
- Ethernet adapter: 139
- Change SCSI ID 141
- Update System Firmware 141
- Select Language 143
- Open Firmware Command Line 144
- Removing the Cover 147
- Replacement 149
- DASD 2-Pack Assembly 150
- Removal 150
- Power Supply 151
- Cable Ties 152
- (Top View) 153
- Riser Card Support Bracket 154
- Riser Card 155
- System Board 156
- Fansink Location 158
- Replacement 159
- Front Covers 161
- Power Switch 162
- I/O Port Cable Assembly 165
- Diskette Drive Assembly 166
- CD-ROM Drive Assembly 167
- Internal Disk Drives 168
- Memory Modules 170
- Removing Memory Modules 170
- Changing the Battery 175
- Chapter 8. Parts Information 177
- Keyboards and Mouse 182
- Power Cables 183
- Index X-1 191
- Index X-3 193
- X-5 195
- Information Development 196
- Department H6DS-9561 196
- 11400 Burnet Road 196
- Austin, TX 78758-3493 196
- BUSINESS REPLY MAIL 196
- Part Number: 03N4113 198
- SA38-564- 198
Manuais e produtos relacionados com Hardware Ibm B50
Hardware Ibm WebSphere Adapters Manual do Utilizador
(226 páginas)
(226 páginas)
Hardware Ibm 22P6959 Manual do Utilizador
(50 páginas)
(50 páginas)
Hardware Ibm Ultra320 Manual do Utilizador
(54 páginas)
(54 páginas)
Hardware Ibm 09-0572-000 Manual do Utilizador
(101 páginas)
(101 páginas)
Hardware Ibm EP-8KTA Manual do Utilizador
(73 páginas)
(73 páginas)
Hardware Ibm 28L2234 Manual do Utilizador
(66 páginas)
(66 páginas)
Hardware Ibm 71P7285 Manual do Utilizador
(77 páginas)
(77 páginas)
Hardware Ibm CFC2 Manual do Utilizador
(154 páginas)
(154 páginas)
Hardware Ibm 2292 Manual do Utilizador
(230 páginas)
(230 páginas)
Hardware Ibm x Series 200 Manual do Utilizador
(152 páginas)
(152 páginas)
Hardware Ibm Cisco MDS 9506 Manual do Utilizador
(6 páginas)
(6 páginas)
Hardware Ibm 48X-20X Manual do Utilizador
(50 páginas)
(50 páginas)
Hardware Ibm THINKPAD 2000 Manual do Utilizador
(88 páginas)
(88 páginas)
Conceptronic 1300079 manuales
Manuales del propietario y guías del usuario para Hdd / ssd recintos Conceptronic 1300079.
Ofrecemos 1 manuales en pdf Conceptronic 1300079 para descargar gratis por tipos de documentos: Ficha de datos
Comentários a estes Manuais