Ibm B50 Manual do Utilizador descarregar pdf (Página 77)

Memory PD Bits

The following table expands the firmware error code 25Cyyrrr on page 3-9, where

yy is the PD value listed in the following table. Use these values to identify the type

of memory that generated the error.

If you replace FRUs and the problem is still not corrected, go to MAP 0030 in the

Diagnostics Information for Multiple Bus Systems unless otherwise indicated in the

tables.

SRN Bus ID Possible Failing Device and

AIX Location Code

Associated FRU

Tablet port/device (01-Q1). system board (see note 3 on

page 2-1, and at the end of

this table).

Note: If a network adapter or the system board is replaced, the network administrator must be

notified so that the client IP addresses used by the server can be changed. In addition, the operating

system configuration of the network controller may need to be changed in order to enable system

startup. Also check to ensure that any client or server that addresses this system is updated.

PD Value Size Speed (nsecs) Parity/ECC

58 34MB 10 ECC

38 128MB 10 ECC

Chapter 3. Error Code to FRU Index 3-13

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 197 198

Sem comentários

Ibm B50 Manual do Utilizador Página 77