Ibm B50 Manual do Utilizador descarregar pdf (Página 90)

Checkpoint

(hex)

Description Repair Action

E602 SSA PCI adapter

open firmware has

started.

1. Replace the adapter.

2. See “Unresolved problems” on page 3-26

E603 SSA PCI adapter

BIST has completed

with an error.

1. Replace the adapter.

2. See “Unresolved problems” on page 3-26

E604 SSA PCI adapter

BIST and

subsequent POSTs

have completed

successfully.

1. Replace the adapter.

2. See “Unresolved problems” on page 3-26

E605 SSA PCI adapter

BIST has completed

successfully but the

subsequent POSTs

have failed.

1. Replace the adapter.

2. See “Unresolved problems” on page 3-26

E60E SSA PCI adapter

open firmware about

to exit (no stack

corruption)

1. Replace the adapter.

2. See “Unresolved problems” on page 3-26

E60F SSA PCI adapter

open firmware has

run unsuccessfully.

1. Replace the adapter.

2. See “Unresolved problems” on page 3-26

E6FF SSA PCI adapter

open firmware about

to exit ( with stack

corruption ).

1. Replace the adapter.

2. See “Unresolved problems” on page 3-26

Unresolved problems: Go to “MAP 1540: Minimum Configuration” on page

2-17 for any of the following conditions:

 A 4-digit code in the range of “E100” through “EFFF” is displayed on the operator

panel display but is not listed in the table that lists firmware checkpoints on page

3-14.

 A 4-digit code is displayed and is listed in the table that lists firmware

checkpoints on page 3-14, but there are no repair actions or FRUs listed for the

code.

 All of the FRUs listed in repair actions have been replaced, and the problem has

not been corrected.

3-26 7046 Model B50 Service Guide

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 197 198

Comentários a estes Manuais

Sem comentários

Ibm B50 Manual do Utilizador Página 90

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Ibm B50